Other Accessories

Bosch Accessories - Buy Bosch, Taparia & 3M Cutting Blades, Drill Bits & Screwdriver Bit Sets Online

A power tool without the right accessory fitted is just a motor - it is the blade, bit or disc that actually cuts, drills or drives, and the wrong choice here can be as limiting as not having the tool at all. At Fixxly, this range covers Bosch, Taparia and 3M - screwdriver and drill bit sets, diamond and metal cutting blades, a circular saw blade, and a mirror mounting tape for finishing jobs. This guide covers the specific accessories stocked here, how to match them to the tool and the material, and where a specialist accessory genuinely earns its higher price over a generic one.

Bosch accessories: bit sets and blades

Bosch's X-Line 34-piece drill bit and screwdriver bit set covers general drilling and driving across wood, metal and masonry in one kit, while the 10-piece Ph2 double-ended screwdriver bit set focuses specifically on Phillips-head driving for repetitive assembly work, where a dedicated set outlasts using a general kit's single Ph2 bit repeatedly. For cutting, Bosch stocks a 40-tooth circular saw blade for wood cutting and a 10x20/16mm diamond cutting blade for tile, stone and masonry.

Taparia diamond cutting blade and hammer drill bit

Taparia's diamond cutting blade handles tile, stone and masonry cutting at a different price point from the Bosch equivalent, giving a lower-cost option for occasional use rather than daily trade work. The Taparia SDS Plus hammer drill bit is built specifically for hammer-action drilling into concrete and masonry, which a standard drill bit is not designed to withstand - using a standard bit in a hammer drill's hammer setting wears the bit out quickly and gives a poor result.

Generic cutting blades and 3M mounting tape

Generic 4-inch marble cutting blades and 4-inch metal cutting blades cover budget-focused cutting needs for grinders, distinct from the diamond blades used on stone and masonry - a metal blade will not cut stone effectively, and a stone blade is unnecessarily expensive for straightforward metal cutting. The 3M 24mm mirror mounting tape is a specialist adhesive tape for fixing mirrors and lightweight panels without visible fixings, holding securely enough for a mirror's weight when applied correctly to a clean, flat surface.

Why the right blade matters as much as the tool

Fitting the wrong blade type to a job does more than slow things down - a metal-rated blade run against stone will dull or shatter quickly, and a wood blade forced through metal risks kicking back dangerously. Matching the blade material rating to what is actually being cut is a basic safety step as much as a performance one, and the modest price difference between a correctly matched blade and a mismatched one is far cheaper than a damaged tool or a workplace injury.

Why Fixxly for tool accessories

Fixxly is a single platform for the whole project, and these accessories are one part of a tools and accessories department that sits within Fixxly's ten full categories. Every bit, blade and tape currently listed is genuine Bosch, Taparia or 3M, so the accessory fitted to your tool is exactly rated for the job, alongside the drills and grinders they attach to.

	Fixxly	Others
Brand assurance	Genuine Bosch, Taparia and 3M, verified material	Authenticity harder to verify -- a real risk for cutting/drilling safety
Delivery speed	30-minute quick delivery	Same-day if in stock locally, otherwise 1-5 days
Complete tool kit in one order	Blades, bits and mounting accessories together	Usually needs multiple shops or sellers to gather everything
Returns on a bad batch	Straightforward replacement policy	Policies vary, and can be slow for small items

Matching the accessory to the job

• General assembly and repetitive screwdriving: a Bosch bit set with the correct drive type.
• Drilling into concrete or masonry: a Taparia SDS Plus hammer drill bit, not a standard bit.
• Cutting tile, stone or masonry: a Bosch or Taparia diamond cutting blade.
• Cutting wood: a Bosch circular saw blade with the correct tooth count for the cut.
• Cutting metal: a generic metal cutting blade, not a stone or wood-rated one.
• Mounting mirrors or lightweight panels: 3M mirror mounting tape instead of visible fixings.

Getting the most life out of cutting accessories

Cutting blades and drill bits are consumables, but a few habits extend their working life meaningfully. Let the blade or bit do the cutting rather than forcing it, since excessive pressure generates heat that dulls the edge faster than normal use. Clear dust and debris from a masonry bit periodically during a long drilling job, and store blades flat rather than stacked loosely, since edge damage from careless storage is a common, avoidable cause of a blade underperforming from its very first use.

Frequently asked questions

Does Fixxly stock genuine Bosch, Taparia and 3M accessories?

Yes - every bit, blade and tape in this range on Fixxly is genuine Bosch, Taparia or 3M, all well-established tool and accessory brands.

What is the difference between a standard drill bit and an SDS Plus hammer drill bit?

An SDS Plus hammer drill bit, like the Taparia option here, is built to withstand the hammering action of a hammer drill when drilling into concrete or masonry, which a standard twist bit is not designed for and will wear out or fail under.

Should I use a diamond blade or a standard cutting blade for tile?

A diamond cutting blade, from Bosch or Taparia, is needed for tile, stone and masonry, since standard metal or wood-cutting blades cannot cut these hard materials effectively.

What is mirror mounting tape used for?

3M mirror mounting tape is a strong adhesive tape used to fix mirrors and lightweight panels to a wall without visible screws or brackets, giving a clean, fixing-free finish when applied to a clean, flat surface.

Why did my cutting blade wear out so quickly?

This is usually a mismatch between the blade type and the material being cut, or excessive pressure during use generating heat that dulls the edge. Match the blade material rating to the job and let the blade cut at its own pace rather than forcing it.

Can I use the same blade for wood and metal?

No - wood and metal cutting blades are built with different tooth geometry and materials for their specific job. Using a wood blade on metal, or vice versa, gives a poor cut and can damage the blade or the tool.

Explore other categories

Tool accessories are fitted to power tools and hand tools, and used alongside bolts, screws and fasteners on most jobs. Everything a home needs is a click away on Fixxly.