Wood & Hardware
How to Choose the Right Board and Kitchen Hardware
A few checks before you order help you avoid sagging shelves, swollen boards and doors that never shut properly.
- Pick the board by location. Use BWP plywood or HDHMR under the sink and near water, and MR grade plywood or MDF in bedrooms and living rooms.
- Choose thickness by use. 18 mm boards are the usual choice for carcasses and shutters, while 6 mm to 12 mm sheets suit backs and partitions.
- Plan hinges per shutter height. Tall wardrobe shutters generally need three or four hinges instead of two, so they do not sag over time.
- Go soft-close in busy areas. Soft-close hinges and channels in the kitchen cut noise and reduce wear on the cabinet.
- Match channel length to drawer depth, and check the load rating for drawers that hold heavy utensils.
- Plan lighting before fixing panels. For lights inside wardrobes or under wall cabinets, lay wires and switches from our electrical range before the boards go up.
- Order a few spares. Keeping two or three extra hinges, handles and screws saves a second trip at the end of the job.
Most carpentry also needs strong adhesive. You can add Fevicol and wood glue from our paint, Fevicol and cement category to the same order, so boards and laminates can be pressed the same day.
Wood & Hardware for Carpenters and Interior Contractors
Carpenters and interior teams often run two or three sites at once, and a single missing hinge can hold up a whole kitchen installation. With Fixxly, you can order plywood sheets, boxes of hinges, channels and handles in the quantity your site needs, at the best prices, and have them at site in 30 minutes. Send your material list on WhatsApp or as a voice note, and our team will place the order for you. Every order also earns 5% cashback as Fixxly Coins for your next purchase.
Short on screws, wall plugs or brackets for fixing the units? Pick them up from our false ceiling and general hardware range.
Frequently Asked Questions
Do you deliver full plywood sheets in Bangalore?
Yes. Full 8x4 plywood, MDF and HDHMR sheets are delivered to your home or site within our Bangalore delivery area, along with any hardware in the same order.
Which plywood should I use for a kitchen?
BWP plywood or HDHMR is the better choice for kitchen cabinets, especially around the sink, because both handle moisture far better than MR grade boards.
What is the difference between normal and soft-close hinges?
Normal hinges let the shutter close at the speed you push it, while soft-close hinges slow the door in the last few centimetres, so it shuts quietly without slamming.
How many hinges does a wardrobe shutter need?
Most standard shutters need two hinges, while tall wardrobe shutters usually need three or four so the door stays aligned and does not sag over time.
Is MDF plywood good for wardrobes?
MDF gives a smooth, paint-ready finish and works well for shutters in dry rooms. For the main wardrobe frame, plywood or HDHMR offers better screw holding and strength.
Can I order wood and hardware on WhatsApp?
Yes. Share your carpenter's material list or a voice note on WhatsApp and our team will place the order for you. You can pay on delivery.